QuickBooks Error H200: Host Offline Blocks Multi-User Access
QuickBooks error H200 blocks a workstation from opening the company file when the host is offline; this guide restores multi-user access.
Error H200 appears on a workstation when QuickBooks cannot reach the computer that holds the company file in multi-user mode. The file itself is almost always intact. Our engineers treat H200 as a connection fault, and it usually clears with a short round of hosting and network checks.
What does the H200 message say?
The message appears while a second computer tries to open the company file. It reads:
"An error occurred when QuickBooks tried to access the company file. Please try again. If the problem persists, contact Intuit Technical Support and provide them with the following error codes: (H200)."
Some releases show a second code inside the parentheses beside H200, and the wording shifts a little between years. The on-screen text points you to the vendor's support desk. In our experience the fault clears with the checks below, without a support call.
What does error H200 mean?
H200 sits in the H-series family of multi-user errors, alongside H101, H202, H303, and H505. In a multi-user setup, a database service on the host computer serves the company file across the network. H200 means a workstation asked for the file and the request never completed. The host could not answer, or something between the two machines blocked the reply.
What triggers error H200?
Any of these conditions produces the code:
- The host computer is powered off, asleep, or dropped from the network.
- The QuickBooks database services on the host have stopped.
- Hosting is switched on at a workstation rather than at the host.
- A firewall or antivirus module blocks the port the company file uses.
- The .ND file beside the company file is stale or damaged after an update or a file move.
How do you fix error H200?
Take a fresh backup of the company file before you begin. Then work through the scenarios below in order, and stop as soon as the file opens.
The host is off, asleep, or disconnected
- Go to the computer that stores the company file. Confirm it is on, awake, and connected to the network.
- Disable sleep and hibernation on that machine. A sleeping host cannot serve the file.
- Open the company file on the host itself in single-user mode. If it opens there, the file is healthy and the fault lies in the network path.
- At the workstation, ping the host by its computer name. If the name fails but the IP address answers, name resolution is at fault, and opening the file by IP path is a useful test.
Hosting is switched on at the wrong computer
- On each machine that uses the file, press F2 inside QuickBooks to open the Product Information window.
- Find the Hosting line under Local Server Information. The host must read "Hosting on"; every workstation must read "Hosting off".
- At any workstation showing "Hosting on", choose File, then Utilities, then Stop Hosting Multi-User Access.
- At the host, choose File, then Utilities, then Host Multi-User Access.
- Close and reopen QuickBooks on every machine, then try the file again.
The QuickBooks services have stopped on the host
- On the host, press the Windows key and R together, type services.msc, and press Enter.
- Find the service named QuickBooksDB followed by your edition's year number.
- Open its properties, set the startup type to Automatic, and start the service if it is stopped.
- Repeat this for the QBCFMonitorService entry.
- If a service refuses to start, set its logon account to Local System in the properties window, then start it again.
The firewall is blocking QuickBooks traffic
- On the host, open the .ND file that sits beside the company file, using Notepad. It shares the company file's name.
- Note the port number recorded inside that file.
- In the host's firewall settings, add an inbound rule that allows TCP traffic on that port.
- Allow the QuickBooks program files, including QBW32.exe, QBDBMgrN.exe, and QBCFMonitorService.exe, through the firewall and any antivirus suite.
- Check the antivirus network shield as well. Some suites keep their own rules apart from Windows.
The network descriptor file is damaged
- Close QuickBooks on every machine.
- On the host, rename the .ND file beside the company file by adding .OLD to its end.
- Open QuickBooks Database Server Manager on the host, add the folder holding the company file under Scan Folders, and run the scan. This rebuilds the descriptor.
- Reopen the file from the workstation through its network folder rather than an old shortcut.
How can you stop error H200 from returning?
Leave the host powered on with sleep disabled. Give it a fixed IP address, or reserve one for it in the router. Keep both QuickBooks services set to Automatic. Rescan the folder in Database Server Manager after every program update and after any move or rename of the company file.
Re-check firewall exceptions after security software updates, since some updates reset their own rules. Update QuickBooks on every machine so all releases match, because a workstation on an older release can fail against a newer database service.